李过;孙耀宁;王国建;

• 1:新疆大学机械工程学院

摘要(Abstract)：

为探究玻璃纤维增强环氧乙烯基酯树脂基复合材料(GF/EVE)在120℃高温环境下不同老化时间后的低速冲击特性,采用人工加速老化试验和低速冲击试验,基于扫描电镜(SEM)、红外测试(FTIR)和XPS表征手段研究了GF/EVE复合材料的老化机制.研究发现:树脂基体发生了热氧老化降解;高温老化造成树脂分子链的断裂,树脂交联密度降低,导致树脂初始分解温度下降;其次随老化时间增加试样冲击凹坑深度逐渐增大;同时测得了不同老化时间下不同冲击能量的冲击载荷-时间曲线,发现GF/EVE试样所承受的最大冲击载荷随老化时间的增加而下降,并且随着冲击能量的增大,同等老化条件下试样所承受的最大冲击载荷增大.

关键词(KeyWords)： 复合材料;高温环境;热稳定性;低速冲击;冲击损伤

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金(51465055)

作者(Authors): 李过;孙耀宁;王国建;

DOI: 10.13568/j.cnki.651094.651316.2020.04.29.0003

参考文献(References)：

• [1]叶列平,冯鹏.FRP在工程结构中的应用与发展[J].土木工程学报,2006(3):24-36.YE L P,FENG P.Applications and development of fiber-reinforced polymer in engineering structures[J].China Civil Engineering Journal,2006(3):24-36.(in Chinese)
• [2]沈军,谢怀勤.先进复合材料在航空航天领域的研发与应用[J].材料科学与工艺,2008(5):737-740.SHENG J,XIE H Q.Development of research and application of the advanced composite materials in the aerospace engineering[J].Materials Science&Technology,2008(5):737-740.(in Chinese)
• [3]王维庆,何山,董新胜,等.大型风力发电机的发展新动向[J].新疆大学学报(自然科学版),2014,31(3):261-264.WANG W Q,HE S,DONG X S,et al.New trends of the development of large-scale wind power generator[J].Journal of Xinjiang University(Natural Science Edition),2014,31(3):261-264.(in Chinese)
• [4]MINERVINO M,GIGLIOTTI M,LAFARIE-FRENOT M C,et al.The effect of the thermo-oxidation on the mechanical behavior of polymer epoxy materials[J].Polymer Testing,2013,32(6):1020-1028.
• [5]BARJASTEH E,BOSZE E J,TSAI Y I,et al.Thermal aging of fiberglass/carbon hybrid composites[J].Composites Part A:Applied Science and Manufacturing,2009,40(12):2038-2045.
• [6]刘国仓,伍莉,吕家龙,等.玻璃纤维增强乙烯树脂复合材料层合板锥形冲头碰撞试验研究[J].舰船科学技术,2017,39(1):63-67.LIU G C,WU L,LYU J L,et al.Experimental study on impact damage of glass fiber reinforced vinyl resin composite laminates[J].Ship Science and Technology,2017,39(1):63-67.(in Chinese)
• [7]BAUOM J N,ZIKRY M A.Low-velocity impact damage progression in woven E-glass composite systems[J].Composites Part A:Applied Science and Manufacturing,2005,36(5):658-664.
• [8]蒋海滨,魏伯荣,李名琦.薄层芳纶复合材料(内衬吸能垫)的平头冲击性能研究[J].纤维复合材料,2000(4):29-32.JIANG H B,WEI B R,LI M Q.Research on the flat-end impact performance of thin layer aramid composite material (lined with energy-absorbing pad)[J].Fiber Composites,2000(4):29-32.(in Chinese)
• [9]隋晓东,梁成利,刘文博,等.高温老化对碳纤维增强双马来酰亚胺树脂基复合材料力学性能的影响研究[J].纤维复合材料,2011(1):21-23.SUI X D,LIANG C L,LIU W B,et al.Effect of thermal-aging on the mechanical properties of carbon fiber reinforced bis-maleimide composite material[J].Fiber Composites,2011(1):21-23.(in Chinese)
• [10]高禹,刘佳琦,王绍权,等.高温老化对T700/HT280双马来酰亚胺复合材料疲劳性能的影响[J].复合材料学报,2017,34(2):240-246.GAO Y,LIU J Q,WANG S Q,et al.Effect of high temperature aging on the fatigue property of the T700/bismaleimidecomposites[J].Acta Materiae Compositae Sinica,2017,34(2):240-246.(in Chinese)
• [11]American Society for Testing and Materials International.Standard practice for heat aging of plastics without load:ASTMD3045―92[S].West Conshohocken:ASTM International,1992.
• [12]American Society for Testing and Materials International.Standard test method for measuring damage resistance of fiber reinforced polymer matrix composite to a drop-weight impact event:ASTM D7136―05[S].West Conshohocken:ASTM International,2005.
• [13]BOWLES K J,JAYNE D,LEONHARDT T A.Isothermal aging effects on pmr-15 resin[J].Sampe Quarterly-Society for the Advancement of Material and Process Engineering,1993,24(2):2-9.
• [14]KAMON T,FURUKAWA H.Curing mechanisms and mechanical properties of cured epoxy resins,in epoxy resins and composites IV[J].Adv Polym Sci,1986,80:173-202.
• [15]YANG Y,XIAN G,LI H,et al.Thermal aging of an anhydride-cured epoxy resin[J].Polymer Degradation&Stability,2015,118:111-119.